| The Shop > Tools |
| How true/straight slitting saws run? |
| << < (2/2) |
| chipenter:
Trim saw blades work well but are noisy , they can be 1mm thick , work them to hard and the teeth break off . |
| PekkaNF:
--- Quote from: chipenter on December 11, 2018, 04:21:24 AM ---Trim saw blades work well but are noisy , they can be 1mm thick , work them to hard and the teeth break off . --- End quote --- That looks pretty good....what sort of metal thicknesses you have cut with it? Any prescription of steel? Pekka |
| PekkaNF:
Bit related vid... =1324 Tried to make it start at 22 mins ...right at the interesting stuff, but parser seems to vomit timeline....worth watching at the beginning. :D |
| chipenter:
I have cut steel en8 cutting a 300 x 16mm length of cast iron broke two teeth . that photo was taken in 2012 and was my go to saw and is still sharp , just doesn't sound right . |
| Navigation |
| Message Index |
| Previous page |