Author Topic: A little light reading  (Read 5438 times)

Online tom osselton

  • Hero Member
  • *****
  • Posts: 1255
  • Country: ca
A little light reading
« on: November 18, 2018, 01:40:33 PM »
A fellow on another site I go to posted this so I thought I’d pass it on just a little light reading!

https://archive.org/details/ModelEngineerVol073No1807wIndex/page/n19?q=model+engineer

Offline millwright

  • Sr. Member
  • ****
  • Posts: 273
  • Country: gb
  • Leeds West Yorshire
Re: A little light reading
« Reply #1 on: November 18, 2018, 02:13:04 PM »
Great Tom, thanks for passing that on, just had a browse the a few issues. I never tire of reading the old ones. my own collection starts in 1950 so I have plenty of reading to get up to where mine start. :thumbup: :clap:

regards John

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2183
  • Country: gb
Re: A little light reading
« Reply #2 on: November 20, 2018, 05:34:57 PM »
brill

Offline Doc

  • Jr. Member
  • **
  • Posts: 98
  • Country: us
  • Old but still usefull (I hope) ?
    • My Youtube Channel
Re: A little light reading
« Reply #3 on: November 20, 2018, 07:11:26 PM »
I have this book in hard cover. Always found it interesting.     Ingenious Mechanisms

Offline Jo

  • Full Member
  • ***
  • Posts: 156
  • Country: gb
Re: A little light reading
« Reply #4 on: November 21, 2018, 03:17:33 AM »
Thanks guys.

I picked up the ME link elsewhere but its is always useful to make sure everyone gets the opportunity  :thumbup:


To add to George's link: there are four volumes in that set of the Ingenious Mechanisms books, you can down load each by just incrementing the volume number in the link. I have the earlier 3 volume set in hard copy, now I have the later four volume set to read  :beer:

Jo
So many engines to build and yet so little time.