| The Shop > Electronics & IC Programing |
| Motor wiring help |
| (1/2) > >> |
| farmerjoe:
Hi guys, Having done much reading and research I decided to build a phase converter, of the rotary type. The problem I have is that when I opened the terminal box for the motor I have to hand, it didn’t look like I was expecting. I.e, not like the pictures or diagrams you see online. Even the numbering isn’t what seems to be the norm. It is a 2 speed which maybe the reason. I’d like to wire it up to run in the star position giving the higher kw out put. This is only a temporary for the build so that I can get my new mill operational. Any help with this greatly appreciated. I’ll try attaching a picture. |
| John Rudd:
Hi, Given the numbering of the wires, I suspect A1,B1 and C1 to be the Star point. Then A2/A3 are the tap and end of one ine winding...ergo to change the speed it would be a matter of joining A2/A3 together....etc. Do you have a foto of the motor data plate? |
| farmerjoe:
Hi john, Hopefully picture of motor plate is below. https://madmodder.net/index.php?action=dlattach;topic=12579.0;attach=40949;image |
| farmerjoe:
https://madmodder.net/index.php?action=dlattach;topic=12579.0;attach=40949;image |
| John Rudd:
Too small......cant see much.. |
| Navigation |
| Message Index |
| Next page |