The Shop > CNC

Fog Misting

<< < (3/3)

rowbare:
Why not build a mistless sprayer instead? Your lungs and everything in your shop will thank you. Search google for diy fogbuster and you will find more than enough information to build your own. It is well described in US Patent 5390854  (now expired) https://patents.google.com/patent/US5390854A/en?oq=5390854.

bob

chipenter:
The idea with the fogbuster is that it is not a mist that can be inhaled by the machinist , but a fog of droplets at lower pressure than a mist spray , standard coolant and air to cool and clear the chips .

PK:

--- Quote from: rowbare on September 19, 2018, 11:47:52 AM ---Why not build a mistless sprayer instead? Your lungs and everything in your shop will thank you. Search google for diy fogbuster and you will find more than enough information to build your own. It is well described in US Patent 5390854  (now expired) https://patents.google.com/patent/US5390854A/en?oq=5390854.

--- End quote ---
Bob, that's basically what all mine are. The small amount of pressure on the reservoir forces coolant drips out of the tip where they are en-trained in the airflow and spat at the tool.

Navigation

[0] Message Index

[*] Previous page