Author Topic: Aluminium Quorn  (Read 5302 times)

Offline Jonfb64

  • Jr. Member
  • **
  • Posts: 80
  • Country: england
Aluminium Quorn
« on: September 14, 2018, 02:49:01 PM »
For a number of years now I have been wanting a Quorn TCG. Unfortunately casting are just too expensive even if you can find them. So i thought it would be an ideal project for some home casting.

Lets get started.

First read the book multiple times :coffee:
Secondly search out machine porn pictures with google  :drool:
Thirdly start gluing and hacking at mahogany to make patterns  :lol:

 

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 463
  • Country: at
Re: Aluminium Quorn
« Reply #1 on: September 15, 2018, 04:54:42 PM »
Nice castings.Good start.
Mark
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline Hoss

  • Newbie
  • *
  • Posts: 3
Re: Aluminium Quorn
« Reply #2 on: January 07, 2020, 10:21:22 PM »
 :update: please give us an update.

Offline Jonfb64

  • Jr. Member
  • **
  • Posts: 80
  • Country: england
Re: Aluminium Quorn
« Reply #3 on: November 17, 2020, 12:31:23 PM »
Hi,

Sorry no progress on this project as life has got in the way. Hoping to restart soon.

Jon

Offline vtsteam

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 6466
  • Country: us
  • Republic of Vermont
Re: Aluminium Quorn
« Reply #4 on: January 03, 2022, 08:24:32 AM »
Good to see some machine casting here again! :clap: How many castings are there in a Quorn?
I love it when a Plan B comes together!
Steve
https://www.youtube.com/watch?v=4sDubB0-REg

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8966
  • Country: gb
  • East Sussex, UK
Re: Aluminium Quorn
« Reply #5 on: January 03, 2022, 10:31:36 AM »
A quick mental count up and a look at the Hemmingway site says eight major ones with a few  bits and bobs that could be cast or turned from solid Steve

(Though the text says 10 iron, 2 aluminium and 1 gunmetal)


http://www.hemingwaykits.com/acatalog/Quorn__Mk3__T_C__Grinder.html
Andrew Mawson
East Sussex

Offline vtsteam

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 6466
  • Country: us
  • Republic of Vermont
Re: Aluminium Quorn
« Reply #6 on: January 03, 2022, 02:40:01 PM »
Thanks Andrew. So those are the two bed ends. Definitely a good start.  :thumbup:
I love it when a Plan B comes together!
Steve
https://www.youtube.com/watch?v=4sDubB0-REg

Offline kayzed1

  • Sr. Member
  • ****
  • Posts: 294
Re: Aluminium Quorn
« Reply #7 on: January 03, 2022, 07:23:18 PM »
Owwww! goody, i'll take a set please..how many groats? Some thing to do before i get too old.. :beer:
Lyn.

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8966
  • Country: gb
  • East Sussex, UK
Re: Aluminium Quorn
« Reply #8 on: January 04, 2022, 03:59:47 AM »
In my time I've owned two Quorns - neither made by me.

In both cases the maker hadn't really used them, then having deceased, the family had left them in unheated sheds to slowly rust. Very sad as to make a Quorn from scratch is practically a lifetimes work if all the fiddly bits are properly formed.

In practise having restored them both mechanically and cosmetically I found that I very rarely used them as most bits I was doing were more suited to my Clarkson so I passed them on.
Andrew Mawson
East Sussex

Offline vtsteam

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 6466
  • Country: us
  • Republic of Vermont
Re: Aluminium Quorn
« Reply #9 on: January 04, 2022, 09:17:41 AM »
It's a pretty piece of equipment, and I can see the attraction in building one. Also more compact and if scrap and home castings are used, less expensive than a commercial precision tool grinder. Definitely suited to the typical small home shop or garden shed.

Yes, rust and sheds, the perennial problem....well and old age, too. Nice of you to restore them and pass them on to others, Andrew.  :beer:
I love it when a Plan B comes together!
Steve
https://www.youtube.com/watch?v=4sDubB0-REg

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8966
  • Country: gb
  • East Sussex, UK
Re: Aluminium Quorn
« Reply #10 on: January 04, 2022, 09:51:08 AM »
Dennis Chaddock was a long time member of SM&EE and I do seem to remember when I was chairman in 1998 his model of the BRM engine that triggered the creation of the Quorn was in our model collection.

It's been displayed over the years at several exhibitions - have a picture :

Andrew Mawson
East Sussex

Offline vtsteam

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 6466
  • Country: us
  • Republic of Vermont
Re: Aluminium Quorn
« Reply #11 on: January 04, 2022, 03:41:49 PM »
Over the years I have collected Model Engineer magazines back to the fifties, with some definite gaps, but I particularly remember Mr. Chaddock, in print at least, as the promoter and judge of the hot air engine competitions and a theorist for the type. Hot air and flash steam engines are a main interest for me.  :coffee:
I love it when a Plan B comes together!
Steve
https://www.youtube.com/watch?v=4sDubB0-REg

Offline mattinker

  • Hero Member
  • *****
  • Posts: 1316
  • Country: fr
Re: Aluminium Quorn
« Reply #12 on: January 05, 2022, 07:18:54 AM »
Jonfb64

I'm a bit slow on the uptake! Why cast them in Al? Za12 would be better, supposed to have similar characteristics to cast iron!

Cheers, Matthew