The Shop > Composites & Plastics
Fursuit Partial Video
WeldingRod:
You could use modern furby eyes with a colored filter over them. They are round micro lcd displays with a backlight. I bet you could change the backlight source to another color!
Sent from my SAMSUNG-SM-G891A using Tapatalk
S. Heslop:
--- Quote from: WeldingRod on August 10, 2018, 09:38:00 PM ---It turns out that silicone is easy to bond!
Either use silicone caulk (if you want fully flexible) or rubber toughened superglue (loctite black max). You MUST use a heptane based primer with copper Sulfate in it. Allow the primer to dry, then glue it.
I had to do some measurements of silicone bonding strength on Aluminum, and I needed a way to attach the pull test dollies. Worked like a charm, and the rubber would either come off of the plate I was testing, or it would tear the bulk rubber. A superglue failure was really rare (just a couple in 50 or so tests).
Sent from my SAMSUNG-SM-G891A using Tapatalk
--- End quote ---
That's fantastic information! Thanks for posting it.
I'm not as happy to hear they found a way to make furbies even more horrific though.
Edit: To add to that a bit. I've not found alot of people trying to glue silicones on the internet, and all i've found are a few product pitches that promise the world. So I appreciate hearing about something that works.
Navigation
[0] Message Index
[*] Previous page
Go to full version