The Shop > Composites & Plastics |
Fursuit Partial Video |
<< < (3/3) |
WeldingRod:
You could use modern furby eyes with a colored filter over them. They are round micro lcd displays with a backlight. I bet you could change the backlight source to another color! Sent from my SAMSUNG-SM-G891A using Tapatalk |
S. Heslop:
--- Quote from: WeldingRod on August 10, 2018, 09:38:00 PM ---It turns out that silicone is easy to bond! Either use silicone caulk (if you want fully flexible) or rubber toughened superglue (loctite black max). You MUST use a heptane based primer with copper Sulfate in it. Allow the primer to dry, then glue it. I had to do some measurements of silicone bonding strength on Aluminum, and I needed a way to attach the pull test dollies. Worked like a charm, and the rubber would either come off of the plate I was testing, or it would tear the bulk rubber. A superglue failure was really rare (just a couple in 50 or so tests). Sent from my SAMSUNG-SM-G891A using Tapatalk --- End quote --- That's fantastic information! Thanks for posting it. I'm not as happy to hear they found a way to make furbies even more horrific though. Edit: To add to that a bit. I've not found alot of people trying to glue silicones on the internet, and all i've found are a few product pitches that promise the world. So I appreciate hearing about something that works. |
Navigation |
Message Index |
Previous page |