Author Topic: Hi from Germany  (Read 4200 times)

Offline hdo27

  • Jr. Member
  • **
  • Posts: 7
Hi from Germany
« on: July 09, 2018, 03:10:30 AM »
Hi all,

i'm from Germany and own a DIY cheap CNC machine i'm looking to replace
my current CNC setup based on Arduino GRBL and bCNC with a offline CNC
controller (DDCSV2.1)

Regards,

hdo

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8966
  • Country: gb
  • East Sussex, UK
Re: Hi from Germany
« Reply #1 on: July 09, 2018, 05:13:31 AM »
Hi HDO, welcome aboard, do let us know about your CNC machine and what you are doing with it.

Lots of support here on the forum
Andrew Mawson
East Sussex

Offline vtsteam

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 6466
  • Country: us
  • Republic of Vermont
Re: Hi from Germany
« Reply #2 on: July 09, 2018, 12:00:45 PM »
Hi hdo, welcome!  :wave:
I love it when a Plan B comes together!
Steve
https://www.youtube.com/watch?v=4sDubB0-REg

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2183
  • Country: gb
Re: Hi from Germany
« Reply #3 on: July 09, 2018, 05:20:05 PM »
hi and welcome

Offline hdo27

  • Jr. Member
  • **
  • Posts: 7
Re: Hi from Germany
« Reply #4 on: July 10, 2018, 02:49:02 AM »
Thanks all!

I build a CNC machine out of plywood which was featured in the Germany edition of the Make magazine (2014).
The build was done in a local maker space nearby.

I also own a small german youtube channel featuring my machine :-)

https://www.youtube.com/channel/UCAxtKPCrl_JZVNRNzqVIZ6g

However it's been a while since i did anything with the machine :-(

Just bought a DDCSV controller for my machine and can't wait to play around with it ;-)

Regards,

hdo