The Craftmans Shop > New from Old
The Sequel - Oh Blimey I bought a CNC Lathe (Beaver TC 20)
Pete.:
I've said it before but I have to admire your tenacity Andrew.
That wouldn't be giving me any more trouble by now if I was working on it :hammer: :hammer: :hammer: :hammer:
AdeV:
Aaah, I see! Very clever :smart:
Although one immediately wonders what would happen if bits 47.1 and 47.2 were both set to true! (a real RS flipflop would output 0...)
I can see why you want a printout of the whole thing, it must be a bear trying to trace it all one logic unit at a time... It will be interesting to see if the Mazak has something similar (I guess it will).
David Jupp:
But the one in Andrew's screen shot looks like an SR not an RS so Set will take priority over Re-set as this rung is evaluated.
awemawson:
Ade, I need the whole shooting match to check what is happening with the M20 command.
Chap hasn't got back to me yet BUT I'VE DONE IT MYSELF :ddb: :ddb:
Simple when you know how and ignore the distractions in the manual that refer to printing and seem to have no relevance what so ever !
.PDF attached of the whole of PB202
AdeV:
Crumbs - I'd not like to try to work that lot out without a manual and a stiff cup of coffee!
What are the segments that look a little like machine code? And what do they do? :scratch:
I reckon, if you gave me a week & a text version of that file, and a few hints from the manual, I could come up with a nice lathe simulator for you :lol:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version