| The Craftmans Shop > New from Old |
| The Sequel - Oh Blimey I bought a CNC Lathe (Beaver TC 20) |
| << < (249/256) > >> |
| awemawson:
Well in this project, pre-determined is that the data lines are labelled 1-16 but the address lines are labelled 0-15, and even worse, the data line appear on pins with A(nn) numbering leading to all sorts of confusion. However, personally I think things should be labelled as what they are! If labelling a class of four items as 1-3 and no label, you are stuck when label 2 falls off, and in the real world this happens all to often. |
| awemawson:
So I got the remaining rows 'B' & 'C' crimped and sleeved so now at last perhaps I can get down to proper testing! |
| WeldingRod:
That's easy! You label all four because that way you have a check sum ;-) Otherwise, if your tape fails you have two identically "not labelled" parts... Sent from my SM-G892A using Tapatalk |
| vintageandclassicrepairs:
Hi Andrew I have to admire your enthusiasm and energy pursuing this fault finding "adventure" In a previous life I worked as a spark and instrument tech at a combined cycle gas fired powered station Seeing the multitude of connections on your "test rig" reminds me of my work back then All long gone now (including me)!! John |
| awemawson:
Thanks for your kind words John. I don’t HAVE to do this but it keeps my brain working! |
| Navigation |
| Message Index |
| Next page |
| Previous page |