The Craftmans Shop > New from Old
The Sequel - Oh Blimey I bought a CNC Lathe (Beaver TC 20)
awemawson:
And here is an illustration of the Groove approach and it's associated oops ! The two hole patterns are here rotated 15 degrees relative to each other to give maximum clearance. Trying other rotations results in problems elsewhere.
. . . .my head hurts 1
WeldingRod:
I hate to suggest 1mm cord...
Sent from my SM-G892A using Tapatalk
awemawson:
Yes I agree, but A:/ I'm not sure how well it will pressure seal, and B:/ I don't fancy cutting those oval grooves with a 1 mm ball ended mill in EN24T, but then I'm just a coward :clap:
Experimentation called for I think
WeldingRod:
They seal just fine. We use them at 10,000 psi and up. Kind of easy to nip/ damage/screw up... You should buy the harder durometer, though. As a face seal you wont have any issues and it will give you more margin on extrusion. You don't get a lot of squeeze on them.
Sent from my SM-G892A using Tapatalk
WeldingRod:
Oh, I forgot: square groove corners are fine. It's not worth messing with a ball end mill.
Sent from my SM-G892A using Tapatalk
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version