Gallery, Projects and General > Project Logs
Little lathe tool grinder.
dvbydt:
Well, for once it looks as if I have conquered modern technology without it biting me!
Lets try a Ctrl V :-
Yea. That link should take you to a very short video of the grinder being used.
Ian
DICKEYBIRD:
Great, thanks Ian. That's a good little video! I have all the bits'n pieces stashed in my shop to build one very similar to yours. After seeing it, I need to nudge mine a bit closer to the top of the list. :beer:
dvbydt:
Great, I am just pleased that the video worked! I wish you every success with your build.
Ian.
vtsteam:
Very nice! :clap: :thumbup: Sorry I missed this one. :beer:
dvbydt:
Thanks for the interest.
Decided to make a dedicated grinding "cupboard". The venerable Wolf double ended grinder is mounted on a pair of drawer slides so that I can pull it out and lock it in position when polishing on the right hand side (Beartex wheel). Slides are cheap enough to replace if the dust ruins them.
At the back is a fishtail from my Vax vacuum to keep the dust flow away from me.
Lighting is provided by four LEDs - G9 base 240 volt 5W 340 lm. Plenty of almost shadowless light (and ideal for extracting miniscule brass splinters!).
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version