The Shop > Our Shop
Thin sheetmetal folding, bending cutting.
PekkaNF:
We do. pretty much have right to return anything within 14 days of purchase. It's still a hassle, but that might be a route I'll take. Probably I will be coming at obtuse angle to the problem and first ask what is the capacity and say that if the capacity is not met, I'll return it.
The prblem is ofcourse what is "fit for purpopose", but if seller says it does 1,0 mm thick mild steel full width and bend is visually straight, then it should.
Still I'd like to succeed on first try.
Pekka
PekkaNF:
Have been googling some sheet metal tools and it looks like most of tools have been made DIY, but can't really find too much material on self made sheet metal cutters.
While cleaning, I found two pieces of pretty hard steel 12 mm thick and about 32 mm tall, threaded holes on the middle.
Could these be from sheet metal cutter?
Pekka
mattinker:
--- Quote from: PekkaNF on May 11, 2018, 04:51:29 PM ---Have been googling some sheet metal tools and it looks like most of tools have been made DIY, but can't really find too much material on self made sheet metal cutters.
While cleaning, I found two pieces of pretty hard steel 12 mm thick and about 32 mm tall, threaded holes on the middle.
Could these be from sheet metal cutter?
Pekka
--- End quote ---
They don't look like it to me! First of all, they are straight and secondly, they are symmetrical, my experience of shear blades is that they have one cutting edge.
Regards, Matthew.
PekkaNF:
What about swing beam blades, like this?
https://sc02.alicdn.com/kf/HTB1aKFtnx3IL1JjSZPfq6ArUVXaV/guillotine-hydraulic-shearing-machine-blades-QC12K-CNC.jpg
Pekka
chipenter:
They look like parallels to me check them for straightness , at that size they won't have been cheap .
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version