Gallery, Projects and General > Project Logs
Lathe build project
kayzed1:
I have in a plastic bag under the S7 the old tailstock ram if you want it..Dad must have changed it some years ago...looks ok to my duff eyes.
Lyn.
NormanV:
Kayzed1 PM sent.
Latest job was to make the box to contain the speed controller. I don't have any equipment for sheet metal work so I used my angle grinder to cut out the 2mm sheet aluminium and to score grooves for bending. It turned out very well for me, even the lid fits!
There is enough room for the circuit board the on/off switch and the speed control knob, it should look quite smart.
John Rudd:
Speed control board looks like one of those Chinese jobs from ebay?
NormanV:
It's one of two that I got from you. The other is working very nicely on my milling machine with an identical motor.
John Rudd:
--- Quote from: NormanV on May 13, 2018, 06:57:53 AM ---It's one of two that I got from you. The other is working very nicely on my milling machine with an identical motor.
--- End quote ---
Ahh.....I see..Very good, carry on then... :lol:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version