| Gallery, Projects and General > Project Logs |
| let ther be light |
| << < (3/6) > >> |
| awemawson:
Nice one Bob :thumbup: Don't blow yourself up :zap: |
| krv3000:
lol as all redy dun that had a go at making a gas generator I used a glass jar witch went bang :) |
| tom osselton:
And did you have your safety glasses on? :coffee: |
| krv3000:
errr wots them |
| krv3000:
hi all did any one spot the mistake in the mounting bracket any way did a bit more tonight I finish off the filler cap I made a retainer out of brass wire for one end off the bobbly chain that's the end that goes in to the tank the other end I remove one of the balls so the pin link goes threw the hole in the cap then I drilled a series of 1mm holes in the dome that's the cap dun next I fitted the bezel I made two 2mm stanles steel screws to look like rivets by placing a dome of soft solder on there heads them just screwed the bezel to its hinge right pics |
| Navigation |
| Message Index |
| Next page |
| Previous page |