| Gallery, Projects and General > How do I?? |
| Cross slide replacement nut |
| << < (3/4) > >> |
| NormanV:
I have considered "Evanuts" for my Raglan Mk 1 and my Loughborough lathe but there does not appear to be much space in the "tunnel" that they would have to pass through. I mostly use the Loughborough lathe and was able to transfer the nut from the Raglan, which leaves me with a problem with my Raglan. I had hoped that Latheparts would have been the answer. |
| AdeV:
Am I missing something about that "Evanut" thread? Like, there's zero information on actually making one, as if the post has been mostly removed? |
| Pete.:
It has because Evan the author had some kind of hissy fit. Never mind though because. it's copied on another forum: http://www.denfordata.com/bb/viewtopic.php?f=50&t=3727 |
| chipenter:
Tony at Lathes.co.uk is asking £95 for a cross slide nutt , £125 for the screw . |
| appletree:
Thanks for all the various replies, I have considered the event or at least something similar, some people think metal chips will get embedded and turn the nut into an abrasive. Tony's nuts are expensive at £95 (somebody told me John ward made the Raglan bits for Tony, though I don't know that personaly), hence after all the above considerations, I posted the questions at the start of the thread (no pup intended). Phil |
| Navigation |
| Message Index |
| Next page |
| Previous page |