Home Base > Introductions

Hi from southern tip of Cotswolds, UK.

<< < (2/2)

mexican jon:
Welcome aboard Simon  :wave: :wave:

howsitwork?:
Metal working to a achieve wood working, yup that ticks all the boxes.

Welcome along.

Ian

Fergus OMore:
Welcome .I'm curious about the SiegSC4 with a milling attachment especially in view of the MyfordML7.

Thanks to Peter and Bob( KRV3000) I have the earlier S4 now installed in what serves as my study.

Instead of having a dedicated milling attachment, I cannibalised my Myford things to go on my Sieg.

It was nothing more than a bit of 10mm steel as a sub plate and one of my Myford Vertical slides fits quite nicely but a few more holes tapped in the plate allows a fitting of the Geo Thomas small dividing head to go on instead.
With a bit more thought, the old rotary table from Ivan Law/Model Engineering Services will fit-by adding a few more tapped holes.  It is all very much in the 'suck it and see' stage but I guess that another bit of plate will allow the Geo Thomas rear parting tool to go on as well.

Hope that my way of ticking MY boxes will be of interest

Regards

Norm

howsitwork?:
Sound good. If it works for you then go for it.

Ian

Navigation

[0] Message Index

[*] Previous page