| The Shop > Tools |
| One Screw Clamp |
| (1/1) |
| sbwhart:
Another bit of kit to make again this came from an old copy of the american machinist Being operated with just one screw its less fiddly to use than a two screw toolmakers clamp. I've attached my drawings if you want to make one Stew |
| Spurry:
--- Quote from: sbwhart on February 16, 2018, 01:58:50 AM --- I've attached my drawings if you want to make one Stew --- End quote --- Looks a useful thing to have available. Neat metric drawing too. Is the loco being made with metric dimensions, (threads etc) or all American/imperial? Thanks for the drawing. Pete |
| Meldonmech:
Hi Stew An interesting idea, must add to my inbetween big projects list. Cheers David |
| sbwhart:
--- Quote from: Spurry on February 16, 2018, 04:40:46 AM --- --- Quote from: sbwhart on February 16, 2018, 01:58:50 AM --- I've attached my drawings if you want to make one Stew --- End quote --- Looks a useful thing to have available. Neat metric drawing too. Is the loco being made with metric dimensions, (threads etc) or all American/imperial? Thanks for the drawing. Pete --- End quote --- Pete I’m using metric threads on the loco except where ME is stipulated and as my machinery is metric I convert to metric as I go as I’m nominally following drawings by Don Young. Stew |
| Spurry:
--- Quote from: sbwhart on February 16, 2018, 11:15:53 AM ---I’m using metric threads on the loco except where ME is stipulated and as my machinery is metric I convert to metric as I go as I’m nominally following drawings by Don Young. --- End quote --- Stew Thanks for the info. That must be quite a headache for you, constantly converting the drawings, but you are doing a brilliant job. :thumbup: Pete |
| Navigation |
| Message Index |