Gallery, Projects and General > Scraping
Show us your scraper sharpening devices
PekkaNF:
Well, I have semifinished contraption. I have multiple width scrapers, made jig for each one. There is a cast iron disc that can be covered with different grit thin diamond disc.
It is not finished yet. Mainly it is missing hold down magnets for radius plinth. That has some holes for three different radiuses.
Pekka
Graham Stabler:
This might be of interest to someone:
https://www.ebay.co.uk/itm/Tool-Lapping-honing-Machine/162825786745?hash=item25e92c5579:g:LkgAAOSw-3FZCMOE
Cheers,
Graham
Pete.:
That's been advertised quite a lot but never sold. I think the main reason is it's 415v.
Pete.:
If you were at the class you will recognise this:
http://r.ebay.com/xmvdUv
I have one spare stand left so if someone fancies buying it for lapping their scrapers they can have the stand for the cost of postage.
awemawson:
I can cut more stands out on the CNC Plasma table if the demand is overwhelming Pete !
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version