Author Topic: Hello from Chester in the UK  (Read 4172 times)

Offline oxocube

  • Newbie
  • *
  • Posts: 2
Hello from Chester in the UK
« on: December 02, 2017, 09:54:20 AM »
Hello to everyone and thanks for the add. I am a retired cabinetmaker and budding engineer, I have had many lathes over the years and have recently obtained for little money a Mashtroy Troyan C210T (Warco 220) that apart from flaking paint work on the stand looks like new. I am a life long biker and have several heavy cruisers that i customize and that is where the lathe comes in handy. I hope i can pick up some tips and advise on here and maybe pass some on. Regards Bill.

Offline Meldonmech

  • Hero Member
  • *****
  • Posts: 933
Re: Hello from Chester in the UK
« Reply #1 on: December 02, 2017, 01:20:04 PM »

 Hi Bill
              Welcome to MadModder, there are many motorcyclist who contribute to the Forum. We look forward to seeing
 some of the cruisers you have customised.
                                                                 
                                                   Cheers David

Offline Biggles

  • Full Member
  • ***
  • Posts: 236
  • Country: gb
Re: Hello from Chester in the UK
« Reply #2 on: December 17, 2017, 04:06:09 AM »
Hi and Welcome Bill.

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2183
  • Country: gb
Re: Hello from Chester in the UK
« Reply #3 on: December 17, 2017, 05:05:59 PM »
hi and welcome