| The Shop > Tools |
| pottyengineering Clamping Drill |
| (1/2) > >> |
| sbwhart:
Just completed this clamping drill. You can clamp the complete unit to a large work piece the idea is that I can use it to drill the frame of the 5" loco i'm building giving me greater control of the drilling operation. It just comprises of a windy drill/die grinder attached to a large toolmakers, it slides up and down the pillar via a lever mechanism. =83541997&filters[recent]=1&sort=1&o=1t]http://s431.photobucket.com/user/sbwhart/media/DSC03045_zpstj9k3gzd.jpg.html?filters[user]=83541997&filters[recent]=1&sort=1&o=1t Cheers Stew |
| John Rudd:
Great idea Stu, another ' outside of the box' thought...... Btw, the pb link is faulty...... :scratch: |
| PekkaNF:
Drill is nice...somewhat like mag drill or somewhat I had to with table drill, turn head back and clamp over large part, because that part would not fit into throat. You just need to copy/paste the whole link... =83541997&filters[recent]=1&sort=1&o=1]http://s431.photobucket.com/user/sbwhart/media/DSC03045_zpstj9k3gzd.jpg.html?filters[user]=83541997&filters[recent]=1&sort=1&o=1 Board SW seems to cut too long links or something. |
| mattinker:
Nice idea worth copying!! Regards, Matthew |
| John Rudd:
--- Quote from: PekkaNF on September 21, 2017, 06:52:52 AM ---Drill is nice...somewhat like mag drill or somewhat I had to with table drill, turn head back and clamp over large part, because that part would not fit into throat. You just need to copy/paste the whole link... =83541997&filters[recent]=1&sort=1&o=1]http://s431.photobucket.com/user/sbwhart/media/DSC03045_zpstj9k3gzd.jpg.html?filters[user]=83541997&filters[recent]=1&sort=1&o=1 Board SW seems to cut too long links or something. --- End quote --- Ahh is that what it is...? :scratch: My apologies to Stu.... :bow: |
| Navigation |
| Message Index |
| Next page |