Author Topic: Miniatures by a master!  (Read 6642 times)

Offline Kjelle

  • Full Member
  • ***
  • Posts: 176
  • Country: se
Miniatures by a master!
« on: September 20, 2017, 03:12:53 PM »
Here's a video of a talk held in Kansas City by Bill Robertson. He goes by the nick name Rivett 608 on Practical Machinist. It's about 15 minutes long, and is rivetting!

&feature=youtu.be

Offline jb3cx

  • Jr. Member
  • **
  • Posts: 86
Re: Miniatures by a master!
« Reply #1 on: September 20, 2017, 03:53:27 PM »
Fantastic master craftsman,with i could turn out work like that ,

Offline hopefuldave

  • Full Member
  • ***
  • Posts: 189
  • Country: gb
Re: Miniatures by a master!
« Reply #2 on: September 20, 2017, 05:26:42 PM »
Just wonderful - thanks so much for bringing it to our attention :)

Dave H. (the other one)
Rules are for the obedience of fools, and the guidance of wise men.

Offline Mike E.

  • Jr. Member
  • **
  • Posts: 49
  • Country: us
Re: Miniatures by a master!
« Reply #3 on: September 21, 2017, 05:31:20 AM »
Thanks for posting.  :thumbup:
Mike

California & Wales  - Home, & Home Away

Offline SwarfnStuff

  • Hero Member
  • *****
  • Posts: 588
  • Country: au
Re: Miniatures by a master!
« Reply #4 on: September 22, 2017, 03:55:28 AM »
Well worth the 15 minutes to watch.

Thanks for posting.

John B
Converting good metal into swarf sometimes ending up with something useful. ;-)

Offline mechman48

  • Sr. Member
  • ****
  • Posts: 327
  • Country: gb
Re: Miniatures by a master!
« Reply #5 on: September 22, 2017, 04:35:13 AM »
Watched the video, superb craftsmanship, the time & patience needed must be mind blowing.

George.
George.


Always look on the bright side of life, & remember.. KISS..' Keep It Simple Stupid'

Offline Groundhog

  • Newbie
  • *
  • Posts: 4
  • Country: us
Re: Miniatures by a master!
« Reply #6 on: September 25, 2017, 07:34:20 PM »
Pretty incredible.
Racers say that horsepower is how fast you hit the wall and torque is how big of a hole you make.