The Shop > Tools
Help with alingment of head stock
Joules:
OK sorry, can never tell if I am telling someone to suck eggs or talking way over what they are confident with. You have me scratching my head over this one as the taper and bore can't both be good and then out when together ???
lilyies:
Mate I have been at this for 5 days on and off.
sparky961:
--- Quote from: lilyies on September 04, 2017, 07:06:00 PM ---Mate I have been at this for 5 days on and off.
--- End quote ---
Take the next 5 days off then come back to it. Bet things look different after a break. :)
Fergus OMore:
'Myford' always suggested that you hold a round bar in the three jaw and machine two rings at one setting- and then mike them.
Oddly I got a thing when I bought a very second hand Myford ML10.
It's not the classic way to evaluate the accuracy of your lathe but neither is what you are doing.
Perhaps Georg Schlesinger is where you should really aim.
Norm
gerritv:
This might be useful for the process? http://what-when-how.com/metrology/alignment-tests-on-lathe-metrology/
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version