| Gallery, Projects and General > Project Logs |
| Minnie on the cheap! |
| << < (7/17) > >> |
| NormanV:
I have also completed the smokebox and the perch bracket. I bent the tube for the smokebox from 1.5mm sheet and welded the joint. That was a test for my welding, I initially burnt a hole in it but with a bit of practice I was able to weld a patch in it. It doesn't look too bad and anyway the perch bracket will cover it. |
| awemawson:
Norman, do you know the DP and tooth counts - I'd assume that you probably do ? Let me know and I'll sort through my collection - if I have what you need you can borrow them for the postage both ways. (I have both conventional cutters and hobs) |
| eskoilola:
There is a downside in being on an assignment in Germany. Far away from home. The upside is the weekly flea market. There is a guy who sells machining stuff with prises next to nothing. I bought 4 kilograms of HSS blanks with 40 euros. They have some dirt on them but that is just cosmetics. I will go there now on saturday and buy some more, wrap those into post packet and make You happy. This assuming that the seller is on Lindleystraße. He is always on Schaumainkai but not always on Lindleystraße. The flea market is alternating between those two locations. They also sell decent sausages as my grandson demonstrates. I'll put the pictures of the blanks here now on saturday if the seller was there. http://www.hfm-frankfurt.de/flohm%C3%A4rkte.html |
| NormanV:
Wow, there are generous people on this site! :mmr: What I need is 20DP to cut 15,20,25,30,50 & 80 tooth gears. I think that single point cutters would be best with my milling machine. |
| chipenter:
Make 20 dp single point cutters out of 1/4" silver steel , very much like a fly cutter only flat . |
| Navigation |
| Message Index |
| Next page |
| Previous page |