The Shop > CNC |
My CNC/PC controller Enclosure |
(1/1) |
msimpson:
I designed and built a while back for the DC engineering fair. |
vtsteam:
Well, nice aesthetic job of design. A good teaching tool. In my shop, though it would look like hell a year later, even if I avoided placing it under the router, as would have been my preference. Metal, swarf, sawdust, plastic static, coolant, WD-40 would quickly diminish the art gallery look. I also like the RF shielding afforded by a metal case. But certainly an admirably executed project. |
Brass_Machine:
I can see the PC case modding influences in your work! Cool and interesting! Eric |
msimpson:
I have been hunting for some pics of various PC cases I have built with the CNC. I will post them as I find them. This is one I did about 8 years ago. It is a home theater PC. It (at the time) was connected to my projector and sound system. It only had a single button under the unit near the front to turn it on and off. Every thing else was done with Bluetooth and remotes. |
Brass_Machine:
Very nice looking case! Eric |
Navigation |
Message Index |