| Gallery, Projects and General > Project Logs |
| Schaublin 102 is making chips! |
| (1/1) |
| thecogwheel:
This week I finally managed to get the 102 making chips (somebody on this board needs to invent a time machine!). It took some work mostly in the drive area. I didn’t have access to the proper voltage to drive the existing motor so I decided to replace the original Schaublin motor with new 3/4 HP Baldor that I picked up a year ago for $50. I also wanted to keep the mechanical variable speed drive working. I could have got the old motor rewound, and I might do that some day, but the $800 that I was quoted was a bit rich. After modelling up the existing motor in Fusion I designed up a pulley to fit the Baldor, spacers to place the new motor in the same location as the old one and a motor mounting plate. I used old school methods to make up a plate to mount the VFD and associated electrical components. I made a montage type video of all the work: Here is the direct link: Did some initial cutting with it (really sketchy tooling setup!): Pretty excited to have a working Schaublin in the shop! |
| vtsteam:
Love the bottom vid! I have never seen a lathe able to add metal like that from swarf. That Schaublin is simply amazing! And most useful... :) |
| Navigation |
| Message Index |