| Gallery, Projects and General > How do I?? |
| How to attach a digital micrometer LCD screen to its PCB |
| << < (2/2) |
| Pete W.:
I was going to plead with Joe to reduce the size of his photo. Then I discovered that I can navigate around the expanded photo using the arrow keys! :Doh: :Doh: :Doh: :Doh: :Doh: :Doh: |
| awemawson:
Returning to the O/P's initial question, is the LCD not trapped by the case against the conductive pad and PCB, and thus effectively the case is in this example the 'clip' ? |
| eskoilola:
Just looking at the picture I would suggest that something is missing. Probably the conductive elastomer. These are really special. They conduct vertically but not horizontally. I have 2 micrometers now. One chinese with a LCD and another Starrett which is fully mechanical but speaks some foreign language (have to divide everything by 2.45...). Despite that I prefer the Starrett. |
| Navigation |
| Message Index |
| Previous page |