| The Shop > CNC |
| Cetus3D 3D Printer |
| << < (19/26) > >> |
| PekkaNF:
Those look good. You printed the same design out of PLA and Pet-G? Are they same size? |
| awemawson:
I've not actually measured them, but as the lids and boxes are interchangeable I'd be very surprised if they were not essentially identical |
| awemawson:
Last year I rigged up a 'Hydroponic Pig Cooler', and had occasion to use it yesterday and today: http://madmodder.net/index.php/topic,11459.msg134238.html#msg134238 Trouble is, one of the fittings was badly cracked and instead of a mist was giving a spout of water - probably frost over the winter. So what do you do if you have a 3D printer - print one of course :lol: Initially I drew up and printed just a simple end cap to block off the offending outlet while I was drawing up the proper fitting, and this went quite well |
| awemawson:
Then I drew up the proper thing, but the spray orifice screws on with a M9 x 1mm pitch thread - rather fine to print and I have no die that size. Having printed a 'threadless' one I thought that I'd have a go at the thread setting the printer to its finest resolution but still the 0.4 mm nozzle, and to my amazement it produced a working thread :ddb: I'm VERY impressed with this printer :thumbup: |
| Pete.:
Not surprised, that's bloody good. |
| Navigation |
| Message Index |
| Next page |
| Previous page |