Author Topic: Can I use a chuck in a chuck  (Read 9975 times)

Offline Joules

  • Hero Member
  • *****
  • Posts: 1271
  • Country: gb
Can I use a chuck in a chuck
« on: April 15, 2017, 12:34:50 PM »
YES !!!



Within reason.   To miss quote AvE, keep yer Dick away from my chucks...
Honour your mentors, and pay it forward.

Offline Pete.

  • Hero Member
  • *****
  • Posts: 1075
  • Country: gb
Re: Can I use a chuck in a chuck
« Reply #1 on: April 15, 2017, 01:05:46 PM »
not got a pin chuck then?  :)

Offline Joules

  • Hero Member
  • *****
  • Posts: 1271
  • Country: gb
Re: Can I use a chuck in a chuck
« Reply #2 on: April 15, 2017, 01:07:02 PM »
Nope, and I didn't want to get too close to that dangerous BIG chuck....
Honour your mentors, and pay it forward.

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8966
  • Country: gb
  • East Sussex, UK
Re: Can I use a chuck in a chuck
« Reply #3 on: April 15, 2017, 02:04:17 PM »
I reckon that you're showing off - flash b.....d with some many SHINY chucks  :lol:

(also possibly a bit bored - time on your hands Joules ? )
Andrew Mawson
East Sussex

Offline Joules

  • Hero Member
  • *****
  • Posts: 1271
  • Country: gb
Re: Can I use a chuck in a chuck
« Reply #4 on: April 15, 2017, 02:09:49 PM »
Yeah, works gone quiet and the wife wanted these pin heads rounding off, only another few hundred more to go  :ddb:
Honour your mentors, and pay it forward.

Offline PekkaNF

  • Hero Member
  • *****
  • Posts: 2523
  • Country: fi
Re: Can I use a chuck in a chuck
« Reply #5 on: April 15, 2017, 04:21:26 PM »
You really should get your slice of carrot cake.

You are not you, when you are hungry.

Offline shipto

  • Hero Member
  • *****
  • Posts: 803
  • Country: gb
  • Redditch, UK
Re: Can I use a chuck in a chuck
« Reply #6 on: April 15, 2017, 04:28:22 PM »
The big question is how true does it run  :poke:
Turns out this life c**p is just one big distraction from death but a good one. For the love of god dont give yourself time to think.
https://myshedblog.wordpress.com/

Offline raynerd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 2893
  • Country: gb
    • Raynerds Projects - Raynerd.co.uk
Re: Can I use a chuck in a chuck
« Reply #7 on: April 16, 2017, 02:32:09 AM »
I wish I had so many chucks!! You defo need a pin vice :-)

Did it work or was this just for fun?

Offline Joules

  • Hero Member
  • *****
  • Posts: 1271
  • Country: gb
Re: Can I use a chuck in a chuck
« Reply #8 on: April 16, 2017, 04:55:03 AM »
It's all "Tongue in Chuck" Chris.   :thumbup:
Honour your mentors, and pay it forward.

Offline tom osselton

  • Hero Member
  • *****
  • Posts: 1255
  • Country: ca
Re: Can I use a chuck in a chuck
« Reply #9 on: April 16, 2017, 12:12:31 PM »
Thats what the wood chuck said!  :beer:

Offline mechman48

  • Sr. Member
  • ****
  • Posts: 327
  • Country: gb
Re: Can I use a chuck in a chuck
« Reply #10 on: April 19, 2017, 10:40:36 AM »
Sure you're not designing a mini pagoda   :scratch:

George
George.


Always look on the bright side of life, & remember.. KISS..' Keep It Simple Stupid'

Offline AdeV

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 2434
  • Country: gb
Re: Can I use a chuck in a chuck
« Reply #11 on: April 19, 2017, 11:26:34 AM »
The big question is how true does it run  :poke:

I'm guessing any runout in the first 3 chucks can be addressed by the penultimate 4-jaw chuck, thus reducing TIR to something manageable.  :headbang:

Cheers!
Ade.
--
Location: Wallasey, Merseyside. A long way from anywhere.
Occasionally: Zhengzhou, China. An even longer way from anywhere...

Offline Joules

  • Hero Member
  • *****
  • Posts: 1271
  • Country: gb
Re: Can I use a chuck in a chuck
« Reply #12 on: April 19, 2017, 12:27:10 PM »
It's really good for resonance.  Where as I used to get a poor finish at certain speeds and diameters.  Now it's a crap finish at all speeds. 
 :lol:
Honour your mentors, and pay it forward.

Offline DMIOM

  • Hero Member
  • *****
  • Posts: 676
  • Country: gb
  • Isle of Man
Re: Can I use a chuck in a chuck
« Reply #13 on: April 19, 2017, 01:09:28 PM »
If the drill chuck is too small to grip in the big three-jaw, wouldn't it be better to just wrap it in gaffer tape?  :coffee:

Dave

Offline AdeV

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 2434
  • Country: gb
Re: Can I use a chuck in a chuck
« Reply #14 on: April 21, 2017, 12:58:50 AM »
If the drill chuck is too small to grip in the big three-jaw, wouldn't it be better to just wrap it in gaffer tape?  :coffee:

How's it supposed to reach the workpiece then? Tsk, you haven't thought this through!  :lol:
Cheers!
Ade.
--
Location: Wallasey, Merseyside. A long way from anywhere.
Occasionally: Zhengzhou, China. An even longer way from anywhere...

Offline CrazyModder

  • Jr. Member
  • **
  • Posts: 86
  • Country: de
Re: Can I use a chuck in a chuck
« Reply #15 on: April 21, 2017, 04:58:59 AM »
Within reason.   

Spoken like a real modder.