| Gallery, Projects and General > Project Logs |
| T Nuts |
| << < (8/9) > >> |
| zeusrekning:
Your surface finished look very good. |
| Darren:
Someone commented on machines always looking too clean in their pictures, Mine gets dirty too :) A couple have also commented on the finish I get. In this pic you can see the milled finish and the "other" smoother finish. There is nothing wrong with the milled results, it's very smooth. I'm just playing as I said before. And this is what I use to do this. A bench top belt sander, it's fast and as you can see leaves a nice finish. I'm currently using a very coarse grit on these t-nuts 80grit. 120 grit leaves a much better finish but not needed here. I use this machine a lot and the belt lasts a long time. I think this one has been on for over six months and it's still going strong. I've got a bigger floor mounted belt sander in storage that I've yet to use, be interesting to see how that gets on? |
| rleete:
When you get to the point of blinging up T-nuts, you've got it bad! |
| Darren:
:) |
| Stilldrillin:
--- Quote from: rleete on May 20, 2009, 11:52:11 AM ---When you get to the point of blinging up T-nuts, you've got it bad! --- End quote --- Well........ I`ve heard it all now! :lol: |
| Navigation |
| Message Index |
| Next page |
| Previous page |