The Shop > CNC

Calling MACH 3 experts

<< < (5/5)

David Jupp:
Andrew - if I recall correctly, there is a Plasma screenset which is part of a standard Mach3 install.  It might be worth looking at that set, in case it provides an easier place to start modifying, then the screenset which came with the system.

awemawson:
David, yes you are correct, I have the Plasma screen set.

However my Torch Height Controller, made by Purelogic (in Russia) has all sorts of complications built into it, and bypasses the MACH3 Z axis movement routines to get faster following  by talking directly (by Ethernet) to the Purelogic B.O.B. . Unpicking exactly what they have done is / would be a major bit of reverse engineering, as, as far as I can tell, non of the algorithms have been published.

David Jupp:
Ah OK.

In that case - I'd probably start by copying all their additions to page 0, onto a new page, then delete the extras from page 0.  Obviously there might need to be some extra screen select buttons, or at least re-direction to appropriate screens. 

Sounds like fun...

Navigation

[0] Message Index

[*] Previous page