| Gallery, Projects and General > How do I?? |
| Dividing Head |
| (1/3) > >> |
| chipenter:
I have aquired a Tywanees dividing head Vertex BS-O same as the Grizzly G1053 that is shy some bits , the direct indexing gear no 18 in the PDF is missing , iff anyone hear has one please tell me the number of teeth for me to make one , thanks in advance . |
| awemawson:
Jeff, Just to clarify, is part 18 a shaft with the pinion cut into it, or is it a splined shaft - the drawing resolution isn't quite good enough to tell :scratch: |
| philf:
Hi Jeff, I'll take mine apart later and measure it up. Phil. |
| chipenter:
Part 18 is a 10mm shaft with a pinion on the end , I have disasembled the head as it has sawdust in it will take some pics tomorow and post , you like pictures . |
| philf:
Jeff, It's got 11 teeth. If you want any dimensions let me know. Phil. |
| Navigation |
| Message Index |
| Next page |