| Gallery, Projects and General > Project Logs |
| Titivating a Warco Mechanical hacksaw! |
| << < (3/10) > >> |
| RobWilson:
Looking good Matthew :thumbup: Looks like a very capable saw :dremel: Rob |
| mattinker:
Thanks KRV and Rob, Andrew, a badged Taiwanese saw that is really well put together! Thanks again! Matthew |
| mattinker:
More in the WARCO saga, I hope it's not too long a video and won't drive you all to boredom! I've not made very many videos so I'm having somewhat of an uphill battle! How do I embed this as a youtube video? |
| AdeV:
Hi Matt, When you're writing your post, have a look at the 2 rows of icons above the smileys - the first one on the left, on the second row (underneath the "B") is a Youtube link. Just press that to get: --- Code: ---[you tube][/you tube] --- End code --- (note: I've added spaces so it shows up properly in this post...) Now all you need to do is paste your video's unique code between the two tags, and you're golden! The code appears in the URL (address bar in your browser), just click on it and it should show up in full. Or, once the video has finished playing, copy the code out of the "share" box (see attached picture). e.g. if your Youtube URL looks like this: --- Code: ---https://www.youtube.com/watch?v=zy5rkw4SeP4 --- End code --- Take everything after the "v=", i.e. zy5rkw4SeP4, and paste it between the two tags: --- Code: ---[youtube]zy5rkw4SeP4[/youtube] --- End code --- And you end up with this: HTH! |
| awemawson:
I say Matthew you are getting right into the heart of that donkey saw :bow: I always assumed that there was a spring loaded ball bearing down in there as the one way valve, with the adjuster pressing on it, but in all the years I owned it I never dismantled that bit! |
| Navigation |
| Message Index |
| Next page |
| Previous page |