| Gallery, Projects and General > Project Logs |
| New DRO mounting |
| (1/2) > >> |
| Spurry:
As the three axis readout and 1 micron scales did not materialise with my new mill, an evolution was required. The original setup also had the control buttons and DRO housed within the same box, again quite different to the advertised pictures. This caused some consternation as the buttons always seemed to be in the wrong place to read the DRO and vice versa. Having varifocal specs does not help either. I now have the new DRO on it's own mounting arm. The new box for the buttons is another WIP as are the scales for the new DRO. 1. Original setup 2. Original head unit 3. New DRO head 4. New DRO arm Pete |
| krv3000:
nice |
| RobWilson:
:clap: :clap: Very cool DRO mount Pete, nicely done. :thumbup: I fancy one of those ES12 DRO for my Bridgeport, how do you find the LCD screen? Rob. |
| Spurry:
Thanks Kev/Rob Rob. It's a bit early to say, as it's so cold out there to actually do much... (being a bit of a wimp.) First impressions are that it is very good, clear, with a quick response to movement. It's another of my jobs-in-progress. I still have to mount the proper 0.001 scales for it (works fine with the existing 0.005 ones)and also a new pair of Z readers, and finish off the new button box. As I've now got a 21.50 drill, I could go back to the lathe job... :scratch: Pete |
| RobWilson:
Hi Pete, I may wait and have a look at the DRO at a show, what's it like when viewed from left or right of center, is it still clear? Cheers Rob, (waiting for his shop to warm up :coffee: ) |
| Navigation |
| Message Index |
| Next page |