Gallery, Projects and General > Gallery

My Engines

<< < (2/2)

mexican jon:
 :nrocks: :nrocks:  :headbang: :headbang:

Biggles:
Very nice work.  :clap: :clap:

Roger B:
Thank you all. Yes Rob that's a Hobbymat. I started out with an Einhell minilathe and then moved onto the Hobbymat with the BFE milling head.

I have hopefully managed to add some videos of them running:

This is my first engine driving a small generator. The crankshaft doesn't have balance weights so it is a bit lively.



This is the vertical engine running with coil ignition. I have now changed it back to the originaly planned CDI unit.



This is the horizontal engine running with mechanical fuel injection. The carb is just being used as a throttle. There is another carb hanging over the back of the fuel tank that I used to warm the engine up before fitting the injection manifold.

Manxmodder:
Very nice,Roger. I'm always interested and impressed with the many varied projects that appear on this forum,but I have to confess I have a particular liking for homemade model engines whatever they're powered by.....OZ.

Navigation

[0] Message Index

[*] Previous page