Gallery, Projects and General > Project Logs
New Tractor Shed
awemawson:
Oh yes :clap:
Later that day I sliced and vacuum packed 540 rashers each 6 mm thick. There are always ends of flitches too short for the slicer and misshapen rashers that cannot be packed so lunch yesterday was bacon sandwiches, and although I say it myself this is a particularly good batch :mmr: :thumbup:
awemawson:
A bit of a clear up and tidy up day today. The Aco storm drain was first fully flaunched in concrete then using my digger ground rake we sorted the big bits out of the piles of crushed concrete, filled in the trenching either side of the Aco drain, and raked the yard surrounding the apron into a semblance of level.
All this in preparation for an eight wheeler load of 'road planings' that I hope to receive tomorrow to surface the yard where we have disturbed it. The deep raking should allow the old and new to 'key' together.
I also received the plumbing bits allowing me to mount the pressure gauge on the compressed air outlet. Leak tested successfully using my soapy water spray.
I also sorted out the pile of timber used for shuttering that will double up as making temporary benches for the Scraping Class that will be held here in December.
awemawson:
Having been pressing for delivery dates for the phantom Road Planings for days now, I got a text message out of the blue today (Sunday) asking if I could take delivery in 20 minutes - too right I can :lol:
So now I have a nice big heap (20 tons or there abouts) of what look to be nice and fine road planings - only problem, Darren is busy until at least Wednesday :bang:
Still they are at least here now :thumbup:
Pete.:
Have you still got the vibro-roller there to roll that lot in? Should make a great standing if it's packed down hard.
awemawson:
Yes we have Darren's twin ride on one and my single roller walk behind one :thumbup:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version