The Shop > Finishing

Airless Paint Sprayer

<< < (2/2)

micktoon:
Hi Rob, I think it might be easier and just as quick to used them small size rollers with the velvet type roller, they cover good but can get into 90% of places,  small brush will get the other bits but no overspray or masking off which I think you would need with any spray type method.
   Cheers Mick

Will_D:
Of course I would never recommend this technique:

Sid_Vicious:
Well, at least he was masking up everything he didn't wanted paint on..... :lol: :lol:

jcs0001:
Very good - would never have thought of this method :)

John.

appletree:
I did mine with a standard spray gun with, the paint is too thick to atomise and does not cover if thinned enough. My solution was to pressurise the paint pot with a PRV, spray guns can be bought for less than 10 these days so a possible way.

Phil 

Navigation

[0] Message Index

[*] Previous page

Go to full version