| The Breakroom > The Water Cooler |
| Drill Doctor |
| (1/13) > >> |
| RobWilson:
Hi Lads Any of you chaps have ,use a Drill Doctor ? good ? crap ? Rob |
| sbwhart:
Hi Rob I have a drill doctor it's a nice bit of kit does a good job, but if you can re grind a drill by hand and only have an occasional need to sharpen a drill you have to ? The expense Sy |
| John Rudd:
Rob, I have one of these.... http://www.sealey.co.uk/PLPageBuilder.asp?id=20&method=mViewProduct&productid=17453 This what you mean? Good for drills from 1/8 upwards... Spent over an hour sharpening all my twist drills..... :dremel: |
| RobWilson:
--- Quote from: sbwhart on November 16, 2016, 04:47:10 PM --- Hi Rob I have a drill doctor it's a nice bit of kit does a good job, but if you can re grind a drill by hand and only have an occasional need to sharpen a drill you have to ? The expense Sy --- End quote --- Hi Stew Its mainly for smaller drill bits Stew ,say under 5mm , my eyes seam to be a bit naff at the moment ,(must go for an eye test) , I am fine grinding 6mm and above by hand no problem , its just the smaller sizes :palm: Cheers Rob |
| RobWilson:
--- Quote from: John Rudd on November 16, 2016, 04:57:35 PM ---Rob, I have one of these.... http://www.sealey.co.uk/PLPageBuilder.asp?id=20&method=mViewProduct&productid=17453 This what you mean? Good for drills from 1/8 upwards... Spent over an hour sharpening all my twist drills..... :dremel: --- End quote --- Any chance you could bring it North next time your up John ,just so I can give it a test drive :dremel: Rob |
| Navigation |
| Message Index |
| Next page |