| Gallery, Projects and General > Project Logs |
| 626 mill riser block |
| << < (10/15) > >> |
| John Rudd:
So got the block mounted on the mill, easier than I thought! The bolt holes were in the perfect place for bolting to my angle plate...... All line up ready for first cuttings.... |
| John Rudd:
Feckin'idjit... I've milled the first pocket all wrong!!, :Doh: :Doh: :Doh: and :Doh: A weeks work ruined..... I'm going to take up knitting or summat else...... |
| John Rudd:
I've ordered another billet....£72 worth..... I guess I can take some comfort from the fact that I've machined it so far and it fits and I have the correct dimensions and have a planned machining sequence..... Off for a very large drink lie down in a darkened room..... :doh: |
| awemawson:
Bad luck John, put it down to experience, and add the original one to the 'come in handy' pile |
| mattinker:
Having got that far, I'd be very inclined to have a go at welding it up and re-machining it! Regards, Matthew.l |
| Navigation |
| Message Index |
| Next page |
| Previous page |