The Shop > Wood & Stuff

Ikea led "machine light" - my take

<< < (2/2)

jcs0001:
An update.  I've taped the bare ground wire (from the #10 wire I stripped the other day) to the flexible part of the light, drilling a small hole in the base to anchor it.  It seems to be a little less floppy now and I won't be moving it a lot once it is mounted next to my mill again.

Wire with outer casing:


Taped to the light:


I may add a bit more tape if it is required but I like the intermittent copper look.

John.

howsitwork?:
Nice one John!  :clap:

Might have to try that adaption once sorted out, bit busy shifting / reorganizing currently.

Regards Ian

Navigation

[0] Message Index

[*] Previous page