The Shop > Wood & Stuff |
Ikea led "machine light" - my take |
<< < (2/2) |
jcs0001:
An update. I've taped the bare ground wire (from the #10 wire I stripped the other day) to the flexible part of the light, drilling a small hole in the base to anchor it. It seems to be a little less floppy now and I won't be moving it a lot once it is mounted next to my mill again. Wire with outer casing: Taped to the light: I may add a bit more tape if it is required but I like the intermittent copper look. John. |
howsitwork?:
Nice one John! :clap: Might have to try that adaption once sorted out, bit busy shifting / reorganizing currently. Regards Ian |
Navigation |
Message Index |
Previous page |