The Shop > Tools

Woodruff cutters and keys?

<< < (2/2)

Jasonb:
I used one on the last but one engine I made as that is what was on the drawing, got the 1/8" x 1/2" cutter from MSC and key off e-bay.

Remember you need the cutter dia to suit the length of key you want exposed, bigger the dia the longer the cord of the key.

PekkaNF:
Thank you Jason.

Now I have to see if I REALLY want use it and then chase keys&cutters.

Pekka

Navigation

[0] Message Index

[*] Previous page