| The Shop > Tools |
| Woodruff cutters and keys? |
| << < (2/2) |
| Jasonb:
I used one on the last but one engine I made as that is what was on the drawing, got the 1/8" x 1/2" cutter from MSC and key off e-bay. Remember you need the cutter dia to suit the length of key you want exposed, bigger the dia the longer the cord of the key. |
| PekkaNF:
Thank you Jason. Now I have to see if I REALLY want use it and then chase keys&cutters. Pekka |
| Navigation |
| Message Index |
| Previous page |