| The Shop > Our Shop |
| A Home DIY'ers Shop Tour |
| << < (6/7) > >> |
| RobWilson:
Hi CB Nice one :thumbup: , good to hear you saved an old tool and gave it a new lease of life :med: , So its a modern version of the old fly/toggle press . Any chance when your next in the shop could you please take a few close ups of the press , just so I can get a better look see :) Cheers Rob |
| inthesticks:
Here's a closer look Rob, the C frame still needs further cleaning before the paint goes on but mechanically its done. Full stroke is 1 1/4" and retraction is adjustable from there down to 0. There is a pedal and linkage for operation to go on when it's ready to go. Cheers CB |
| RobWilson:
Cheers for the photos CB It looks a handy tool to have in the shop :dremel: , do you have a specific punching operation in mined ? , When I get a bit better sorted I will be making a set of round punches for my fly press . Rob |
| inthesticks:
I have a couple of sheet metal manual punch sets with full sets of punch dies.I intend on making an adapter to mount in the die set and accept those punch dies. I also intend on making some furniture for the die set to form small sheet metal items such as brackets. Cheers CB |
| krv3000:
lol I can cheat lol but I wont sum brill work shops Rob's is like the tardise its bigger on the inside than the out side |
| Navigation |
| Message Index |
| Next page |
| Previous page |