| Gallery, Projects and General > Project Logs |
| Mini Lathe Carriage Stop - my first project! |
| << < (3/3) |
| raynerd:
Cheers chaps: --- Quote ---Now that you know you can mill on the lathe do I see an indicator holder in your future? --- End quote --- Now that I know I can mill - my next project is a vertical slide using Vermont Al idea of mounting the compound slide on angle plate and then the other side onto the cross slide. A small drill vice is then mounted to the now vertical compound. I have a very small drill vice 1 1/2 inch and I went to RDG tools to buy a angle plate lat night. I have all the bits, so I`m going to make a start tonight. Then onto the indicator holder, then the deapth guage, then .... :proj: Chris |
| Stilldrillin:
VERY nicely done Chris! :thumbup: That`s something I really need....... ::) David D |
| websterz:
--- Quote from: craynerd on May 13, 2009, 02:28:30 AM ---Cheers chaps: --- Quote ---Now that you know you can mill on the lathe do I see an indicator holder in your future? --- End quote --- Now that I know I can mill - my next project is a vertical slide using Vermont Al idea of mounting the compound slide on angle plate and then the other side onto the cross slide. A small drill vice is then mounted to the now vertical compound. I have a very small drill vice 1 1/2 inch and I went to RDG tools to buy a angle plate lat night. I have all the bits, so I`m going to make a start tonight. Then onto the indicator holder, then the deapth guage, then .... :proj: Chris --- End quote --- You're gonna' fit right in here! :mmr: :nrocks: |
| Navigation |
| Message Index |
| Previous page |