Gallery, Projects and General > The Design Shop
3D Printed Ball Nut for the Insane
John Stevenson:
Well they have to work to microns Hannu or they wouldn't appear on your radar.
Post us a picture of a finished ball nut or the drawing like Joules has.
:worthless:
Joules:
:poke: I got some stick for not printing a nut. So I am going to man up, and order some BALL's then start on getting a working print done.
John Stevenson:
At least you will print and show yours. You will never see anything that Hannu has 'made' as its all virtual.
This guy has been on the Mach3 forum for years spouting his sub microns accuracy designs and other than a crude jig he showed once made out an old pallet and a length of stuffing, no one has seen any of these futuristic machines he's only months away from marketing.
He's been allowed to get away with it on the Mach forum as frankly he's amusing and every village needs it's idiot. However forums being what they are many can't see see through the bullshit
Joules:
Look what turned up.
8 inches of 2mm ballbearings, better get a sealable box to play with them in, or they are going to get lost in no time.
awemawson:
Looks like a load of balls to me Jules :ddb:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version