Gallery, Projects and General > Project Logs
Wilson's Workshop Waffle
Spurry:
My "system" uses similar boxes but of different sizes, as my "stuff" is not all the same. All the boxes are indexed on the computer, so in theory I should be able to find what I am looking for . :-)This pic is some of them, when the building had nearly been completed,..... before the space got filled up. :scratch:
Pete
RobWilson:
--- Quote from: John Rudd on November 09, 2016, 05:06:34 PM ---Cant wait for a coffee at yours and a tour next time I'm up that way... :)
--- End quote ---
You have an invite to the grand re opening John :thumbup:
Are you up this way over the Christmas ? If so call in .
Rob
RobWilson:
--- Quote from: howsitwork? on November 09, 2016, 05:44:21 PM ---Blimey Rob, that's some storage arrangement :bow:
I 'm going to have to re configure my shop as just been left some stuff by a relative. Don't see any "skyhooks for clamps" up there yet? :med:
What's with the milling machine fetish?. one cabinet per machine and clean (ish) walls really classy mate nicely done. Daren't show mine on here ( as can only fit in sideways past the metal bandsaw).
Regards Ian
--- End quote ---
Hi Ian
Sky hooks for G clamps ,,,,,,,,,,,,well thats in the other shop :lol:
I just like machine tools ,I also have five lathes :palm: ,I have noticed my walls are looking very grubby ,not bad for 18 years of coolant being splashed about ,but I think its time for a re paint ,so bought some paint today . The cabinets just worked out that way .
Cheers Rob
RobWilson:
--- Quote from: Pete W. on November 10, 2016, 05:47:58 AM ---Hi there, Rob,
Wow, that's some storage capacity you've got there! :drool: :drool: :drool:
I guess you'll need a good labelling system to keep track of that's where.
I see that you've got a suspension bar from the ceiling. What is the ceiling material, it looks like painted OSB?
--- End quote ---
Cheers Pete
I have ordered a set of 2" vinyl numbers to stick on the boxes , plan label boxes 1 to what ever and have a book with one page per box listing content .
The ceiling is 9mm OSB board :thumbup:, the hangers fixings go through the OSB board into the 6x2 ceiling joist ,thats why the shelf end piece protrudes passed the front face of the shelf so I could fix to the joist , did you think it was just fixed to the 9 mm board ?
Cheers Rob
RobWilson:
--- Quote from: Spurry on November 10, 2016, 08:53:50 AM ---My "system" uses similar boxes but of different sizes, as my "stuff" is not all the same. All the boxes are indexed on the computer, so in theory I should be able to find what I am looking for . :-)This pic is some of them, when the building had nearly been completed,..... before the space got filled up. :scratch:
Pete
--- End quote ---
Nice setup Pete :clap: :clap:
Rob
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version