Author Topic: DDCSV1.1 4 Axis controller  (Read 393343 times)

Offline Muzzerboy

  • Full Member
  • ***
  • Posts: 106
  • Country: gb
    • The Mighty Shiz
Re: DDCSV1.1 4 Axis controller
« Reply #1000 on: October 21, 2020, 03:04:58 PM »
This may have been asked before but the DDSV doesn't (yet) support lathe functions natively, so what is considered the next best option for a self contained controller for a lathe conversion? I'm sort of thinking LinuxCNC but it would have been really nice if the DDSV were available in a lathe flavour.

I'm familiar with the Newker / Newkye / SZGH / Adtech options which don't appeal TBH (Chinglish fatigue!). Wondered if there was something in between. The downside of LinuxCNC is that I'd soon have torn all my hair out and there's not as much left as I'd like as it is.

Offline kankarrio

  • Jr. Member
  • **
  • Posts: 8
Re: DDCSV1.1 4 Axis controller
« Reply #1001 on: October 24, 2020, 11:43:24 AM »
Thank you very much for your answers :beer:


as soon as work allows me to install the update to pandora

I wish I had the ddcsv the lathe option, it would also save me a lot of trouble

PS- I express myself very badly in English, I use google translator, I apologize if my words are confusing




Offline WeldingRod

  • Sr. Member
  • ****
  • Posts: 400
Re: DDCSV1.1 4 Axis controller
« Reply #1002 on: October 27, 2020, 10:23:13 PM »
Are we pretty sure the 3.1 firmware works on the 4 axis 2.1 or 1.1 hardware?  Or is the only change in the hardware a new silkscreen?

My mad modder version has started stalling on gcode files for no clear reason.  I think it's time for a re-brain.  Mwah-ha-ha!

Sent from my SM-G892A using Tapatalk


Offline WeldingRod

  • Sr. Member
  • ****
  • Posts: 400
Re: DDCSV1.1 4 Axis controller
« Reply #1003 on: October 29, 2020, 10:49:11 PM »
I can confirm the 3.1 factory firmware runs on the 1.1 hardware!!!

Key improvement: it actually TELLS you why it stopped ;-)

Sent from my SM-G892A using Tapatalk


Offline kankarrio

  • Jr. Member
  • **
  • Posts: 8
Re: DDCSV1.1 4 Axis controller
« Reply #1004 on: January 02, 2023, 02:13:58 PM »
Good morning, my English is not very good.

Could someone send me the latest stable Pandora?

The Pandora website doesn't work and I don't know which files I should download at https://github.com/Pandora-CNC

I have a ddcsv 2.1 and another ddcsv1.1

Thanks in advance

Offline Benedikt

  • Full Member
  • ***
  • Posts: 200
  • Country: de
Re: DDCSV1.1 4 Axis controller
« Reply #1005 on: January 04, 2023, 08:26:11 AM »
Could someone send me the latest stable Pandora?

The Pandora website doesn't work and I don't know which files I should download at https://github.com/Pandora-CNC

Hello, you can download the last version of Pandora Installer at the link below, as the website has been discontinued:
https://github.com/Pandora-CNC/PandoraInstaller/releases/tag/v1.7

Offline kankarrio

  • Jr. Member
  • **
  • Posts: 8
Re: DDCSV1.1 4 Axis controller
« Reply #1006 on: January 07, 2023, 10:32:11 AM »
thank you

I'm going to try it tomorrow

At the moment the version that I installed does not activate the A axis

Let's see if this new one is capable

Offline kankarrio

  • Jr. Member
  • **
  • Posts: 8
Re: DDCSV1.1 4 Axis controller
« Reply #1007 on: January 09, 2023, 06:03:41 AM »
Hi everyone
Thank you very much for the installer.

I have tried the six firmware that it has

and none have made the A axis appear on the screen

I don't see any option in the configuration for it either, although there are all the parameters of axis A

well I finally left the factory 03/06/2020