| The Shop > CNC |
| DDCSV1.1 4 Axis controller |
| << < (20/202) > >> |
| Merlin201314:
--- Quote from: Benedikt M. on October 29, 2016, 07:39:05 AM --- --- Quote from: Merlin201314 on October 29, 2016, 07:35:13 AM --- --- Quote from: Simon0362 on October 26, 2016, 04:49:51 AM ---Hi, I requested a copy of the latest firmware from my supplier (fly-xy) and I received a zip with the install files. Please PM me if you want a copy - or are able to host it 'somewhere'. No idea if it is good or not but it might help someone out - maybe Benedikt or someone more Linux-savvy can check it out. BTW, its for the 4 axis version. BR Simon --- End quote --- I would be more than happy to have the new firmware (4 Axis), would you be happy to email me as an attachment? [emanuel(063) (at)][outlook](dot)[com] Thank you so much, i can manage to upload the files in a host and nake them available for all Regards Emanuel --- End quote --- Hello! You can download the version Simon sent me from here: http://data.bmuessig.eu/CNC/DDCSV11/install-stock-2016061080.zip I am already hosting the file so that anybody can download it. The 3 and 4 axis controllers use the same firmware. Regards, Benedikt Thanks a lot!!!! :beer: So: if the 3/4 axis are the same firmware, why we pay the difference between the 2 controllers? There's a flag somwhere that tell to the controller which is 3 and which is 4 axis for sure, as the electronic board and output connectors and signal are the same..... :doh: Am i wrong? Cheers... Emanuel --- End quote --- --- Quote from: Benedikt M. on October 29, 2016, 07:39:05 AM --- --- Quote from: Merlin201314 on October 29, 2016, 07:35:13 AM --- --- Quote from: Simon0362 on October 26, 2016, 04:49:51 AM ---Hi, I requested a copy of the latest firmware from my supplier (fly-xy) and I received a zip with the install files. Please PM me if you want a copy - or are able to host it 'somewhere'. No idea if it is good or not but it might help someone out - maybe Benedikt or someone more Linux-savvy can check it out. BTW, its for the 4 axis version. BR Simon --- End quote --- I would be more than happy to have the new firmware (4 Axis), would you be happy to email me as an attachment? [emanuel(063) (at)][outlook](dot)[com] Thank you so much, i can manage to upload the files in a host and nake them available for all Regards Emanuel --- End quote --- Hello! You can download the version Simon sent me from here: http://data.bmuessig.eu/CNC/DDCSV11/install-stock-2016061080.zip I am already hosting the file so that anybody can download it. The 3 and 4 axis controllers use the same firmware. Regards, Benedikt --- End quote --- --- Quote from: Simon0362 on October 26, 2016, 04:49:51 AM ---Hi, I requested a copy of the latest firmware from my supplier (fly-xy) and I received a zip with the install files. Please PM me if you want a copy - or are able to host it 'somewhere'. No idea if it is good or not but it might help someone out - maybe Benedikt or someone more Linux-savvy can check it out. BTW, its for the 4 axis version. BR Simon --- End quote --- |
| Benedikt:
--- Quote from: Merlin201314 on October 29, 2016, 08:27:52 AM --- --- Quote from: Benedikt M. on October 29, 2016, 07:39:05 AM --- --- Quote from: Merlin201314 on October 29, 2016, 07:35:13 AM --- --- Quote from: Simon0362 on October 26, 2016, 04:49:51 AM ---Hi, I requested a copy of the latest firmware from my supplier (fly-xy) and I received a zip with the install files. Please PM me if you want a copy - or are able to host it 'somewhere'. No idea if it is good or not but it might help someone out - maybe Benedikt or someone more Linux-savvy can check it out. BTW, its for the 4 axis version. BR Simon --- End quote --- I would be more than happy to have the new firmware (4 Axis), would you be happy to email me as an attachment? [emanuel(063) (at)][outlook](dot)[com] Thank you so much, i can manage to upload the files in a host and nake them available for all Regards Emanuel --- End quote --- Hello! You can download the version Simon sent me from here: http://data.bmuessig.eu/CNC/DDCSV11/install-stock-2016061080.zip I am already hosting the file so that anybody can download it. The 3 and 4 axis controllers use the same firmware. Regards, Benedikt --- End quote --- Thanks a lot!!!! :beer: So: if the 3/4 axis are the same firmware, why we pay the difference between the 2 controllers? There's a flag somwhere that tell to the controller which is 3 and which is 4 axis for sure, as the electronic board and output connectors and signal are the same..... :doh: Am i wrong? Cheers... Emanuel --- End quote --- You are welcome. No, you are absolutely right. There is just a flag that sets whether it is a 3 or 4 axis controller. This is either a simple digital flag/setting, a change in the linux image (which could be changed) or a simple solder bridge on the PCB. The hardware for the other axis is there. The backside of the unit simply says NC for the A-axis pins on the 3-axis controller. I will look some more into this and possibly into finding an easy way to upgrade 3 to 4 axis controllers. |
| Merlin201314:
--- Quote from: Simon0362 on October 26, 2016, 04:49:51 AM ---Hi, I requested a copy of the latest firmware from my supplier (fly-xy) and I received a zip with the install files. Please PM me if you want a copy - or are able to host it 'somewhere'. No idea if it is good or not but it might help someone out - maybe Benedikt or someone more Linux-savvy can check it out. BTW, its for the 4 axis version. BR Simon --- End quote --- --- Quote from: Benedikt M. on October 29, 2016, 08:37:17 AM --- --- Quote from: Merlin201314 on October 29, 2016, 08:27:52 AM --- --- Quote from: Benedikt M. on October 29, 2016, 07:39:05 AM --- --- Quote from: Merlin201314 on October 29, 2016, 07:35:13 AM --- --- Quote from: Simon0362 on October 26, 2016, 04:49:51 AM ---Hi, I requested a copy of the latest firmware from my supplier (fly-xy) and I received a zip with the install files. Please PM me if you want a copy - or are able to host it 'somewhere'. No idea if it is good or not but it might help someone out - maybe Benedikt or someone more Linux-savvy can check it out. BTW, its for the 4 axis version. BR Simon --- End quote --- I would be more than happy to have the new firmware (4 Axis), would you be happy to email me as an attachment? [emanuel(063) (at)][outlook](dot)[com] Thank you so much, i can manage to upload the files in a host and nake them available for all Regards Emanuel --- End quote --- Hello! You can download the version Simon sent me from here: http://data.bmuessig.eu/CNC/DDCSV11/install-stock-2016061080.zip I am already hosting the file so that anybody can download it. The 3 and 4 axis controllers use the same firmware. Regards, Benedikt --- End quote --- Thanks a lot!!!! :beer: So: if the 3/4 axis are the same firmware, why we pay the difference between the 2 controllers? There's a flag somwhere that tell to the controller which is 3 and which is 4 axis for sure, as the electronic board and output connectors and signal are the same..... :doh: Am i wrong? Cheers... Emanuel --- End quote --- You are welcome. No, you are absolutely right. There is just a flag that sets whether it is a 3 or 4 axis controller. This is either a simple digital flag/setting, a change in the linux image (which could be changed) or a simple solder bridge on the PCB. The hardware for the other axis is there. The backside of the unit simply says NC for the A-axis pins on the 3-axis controller. I will look some more into this and possibly into finding an easy way to upgrade 3 to 4 axis controllers. --- End quote --- I wonder if the difference is just the label, chinese often do that, they are not expecting normal people opening the control box and change things, but we are not normal people :) !!!!!! So...... i will open the box and check, but i'm pretty sure i'm right, i will post pictures of what i find out soon. Many thanks for now, Regards Emanuel |
| Benedikt:
--- Quote from: Merlin201314 on October 29, 2016, 09:28:27 AM --- --- Quote from: Simon0362 on October 26, 2016, 04:49:51 AM ---Hi, I requested a copy of the latest firmware from my supplier (fly-xy) and I received a zip with the install files. Please PM me if you want a copy - or are able to host it 'somewhere'. No idea if it is good or not but it might help someone out - maybe Benedikt or someone more Linux-savvy can check it out. BTW, its for the 4 axis version. BR Simon --- End quote --- --- Quote from: Benedikt M. on October 29, 2016, 08:37:17 AM --- --- Quote from: Merlin201314 on October 29, 2016, 08:27:52 AM --- --- Quote from: Benedikt M. on October 29, 2016, 07:39:05 AM --- --- Quote from: Merlin201314 on October 29, 2016, 07:35:13 AM --- --- Quote from: Simon0362 on October 26, 2016, 04:49:51 AM ---Hi, I requested a copy of the latest firmware from my supplier (fly-xy) and I received a zip with the install files. Please PM me if you want a copy - or are able to host it 'somewhere'. No idea if it is good or not but it might help someone out - maybe Benedikt or someone more Linux-savvy can check it out. BTW, its for the 4 axis version. BR Simon --- End quote --- I would be more than happy to have the new firmware (4 Axis), would you be happy to email me as an attachment? [emanuel(063) (at)][outlook](dot)[com] Thank you so much, i can manage to upload the files in a host and nake them available for all Regards Emanuel --- End quote --- Hello! You can download the version Simon sent me from here: http://data.bmuessig.eu/CNC/DDCSV11/install-stock-2016061080.zip I am already hosting the file so that anybody can download it. The 3 and 4 axis controllers use the same firmware. Regards, Benedikt --- End quote --- Thanks a lot!!!! :beer: So: if the 3/4 axis are the same firmware, why we pay the difference between the 2 controllers? There's a flag somwhere that tell to the controller which is 3 and which is 4 axis for sure, as the electronic board and output connectors and signal are the same..... :doh: Am i wrong? Cheers... Emanuel --- End quote --- You are welcome. No, you are absolutely right. There is just a flag that sets whether it is a 3 or 4 axis controller. This is either a simple digital flag/setting, a change in the linux image (which could be changed) or a simple solder bridge on the PCB. The hardware for the other axis is there. The backside of the unit simply says NC for the A-axis pins on the 3-axis controller. I will look some more into this and possibly into finding an easy way to upgrade 3 to 4 axis controllers. --- End quote --- I wonder if the difference is just the label, chinese often do that, they are not expecting normal people opening the control box and change things, but we are not normal people :) !!!!!! So...... i will open the box and check, but i'm pretty sure i'm right, i will post pictures of what i find out soon. Many thanks for now, Regards Emanuel --- End quote --- As you can see in the menu, there is the A axis box. it is simply empty on the 3 axis model. The settings for the A axis are all present on the 3 axis model. I don't know if the 3-axis model still parses the A axis gcode commands. This is yet to be found out. But yes, there is a simply flag. Finding out where it is stored is probably rather easy. I will disassemble the rest of the firmware now and have a closer look. When they manufacture it, they simply use the 4 axis board, set the flag (using either uart or through USB or maybe even with button presses) and then stick the 3 axis label on. Let's try something crazy! Anybody with a 4-axis machine. Could you copy me the linuxrc file that sits at / of the internal file manager. Use [FRO] to copy and [2ND] to paste. Also I just found out the FPGA is mapped to /dev/motion I can't wait to dump the entire flash. |
| Merlin201314:
--- Quote from: Benedikt M. on October 29, 2016, 09:37:25 AM --- --- Quote from: Merlin201314 on October 29, 2016, 09:28:27 AM --- --- Quote from: Simon0362 on October 26, 2016, 04:49:51 AM ---Hi, I requested a copy of the latest firmware from my supplier (fly-xy) and I received a zip with the install files. Please PM me if you want a copy - or are able to host it 'somewhere'. No idea if it is good or not but it might help someone out - maybe Benedikt or someone more Linux-savvy can check it out. BTW, its for the 4 axis version. BR Simon --- End quote --- --- Quote from: Benedikt M. on October 29, 2016, 08:37:17 AM --- --- Quote from: Merlin201314 on October 29, 2016, 08:27:52 AM --- --- Quote from: Benedikt M. on October 29, 2016, 07:39:05 AM --- --- Quote from: Merlin201314 on October 29, 2016, 07:35:13 AM --- --- Quote from: Simon0362 on October 26, 2016, 04:49:51 AM ---Hi, I requested a copy of the latest firmware from my supplier (fly-xy) and I received a zip with the install files. Please PM me if you want a copy - or are able to host it 'somewhere'. No idea if it is good or not but it might help someone out - maybe Benedikt or someone more Linux-savvy can check it out. BTW, its for the 4 axis version. BR Simon --- End quote --- I would be more than happy to have the new firmware (4 Axis), would you be happy to email me as an attachment? [emanuel(063) (at)][outlook](dot)[com] Thank you so much, i can manage to upload the files in a host and nake them available for all Regards Emanuel --- End quote --- Hello! You can download the version Simon sent me from here: http://data.bmuessig.eu/CNC/DDCSV11/install-stock-2016061080.zip I am already hosting the file so that anybody can download it. The 3 and 4 axis controllers use the same firmware. Regards, Benedikt --- End quote --- Thanks a lot!!!! :beer: So: if the 3/4 axis are the same firmware, why we pay the difference between the 2 controllers? There's a flag somwhere that tell to the controller which is 3 and which is 4 axis for sure, as the electronic board and output connectors and signal are the same..... :doh: Am i wrong? Cheers... Emanuel --- End quote --- You are welcome. No, you are absolutely right. There is just a flag that sets whether it is a 3 or 4 axis controller. This is either a simple digital flag/setting, a change in the linux image (which could be changed) or a simple solder bridge on the PCB. The hardware for the other axis is there. The backside of the unit simply says NC for the A-axis pins on the 3-axis controller. I will look some more into this and possibly into finding an easy way to upgrade 3 to 4 axis controllers. --- End quote --- I wonder if the difference is just the label, chinese often do that, they are not expecting normal people opening the control box and change things, but we are not normal people :) !!!!!! So...... i will open the box and check, but i'm pretty sure i'm right, i will post pictures of what i find out soon. Many thanks for now, Regards Emanuel --- End quote --- As you can see in the menu, there is the A axis box. it is simply empty on the 3 axis model. The settings for the A axis are all present on the 3 axis model. I don't know if the 3-axis model still parses the A axis gcode commands. This is yet to be found out. But yes, there is a simply flag. Finding out where it is stored is probably rather easy. I will disassemble the rest of the firmware now and have a closer look. When they manufacture it, they simply use the 4 axis board, set the flag (using either uart or through USB or maybe even with button presses) and then stick the 3 axis label on. Let's try something crazy! Anybody with a 4-axis machine. Could you copy me the linuxrc file that sits at / of the internal file manager. Use [FRO] to copy and [2ND] to paste. Also I just found out the FPGA is mapped to /dev/motion I can't wait to dump the entire flash. --- End quote --- I'll Try, hope i don't delete all the firmware, as is very easy to do with just pressing the "MODE" button... |
| Navigation |
| Message Index |
| Next page |
| Previous page |