| The Shop > CNC |
| DDCSV1.1 4 Axis controller |
| << < (143/202) > >> |
| old Zozo:
--- Quote from: ugv on November 06, 2017, 11:10:04 AM ---i have buy this it's good ? --- End quote --- No. This relay needs more than 100mA, but M8/M9 output of controller has only 20mA. SSR relay can be controlled with less than 20mA. For example this one: https://www.ebay.com/itm/PCB-Mount-Type-4A-SSR-Solid-State-Relay-DC-DC-DC3-32V-Control-DC5-110V-4-Pin/111379031094?hash=item19eeb52436:g:~8IAAOSwnHZYVAjL DDCSV can control it, and you can use it for cooling motor under 5-110V 4A. Only motor needs external power. What is the voltage and current of the motor? I'm not an electronics expert, but someone fixes it if necessary :scratch: |
| ugv:
12v 3w |
| old Zozo:
OK, I'm looking for a matching relay. DC motor, or AC? |
| ugv:
dc , its a electrovane pneumatique 12v 3w airtac 3/2voies |
| ugv:
https://www.ebay.fr/itm/BSP-1-4-DC-12V-3-way-2-position-Pneumatic-Electric-Solenoid-Valve-Air-Aluminum/162143551450?hash=item25c0823fda:g:JLcAAOSwqfNXkK4G |
| Navigation |
| Message Index |
| Next page |
| Previous page |